跳转到主内容

修复你的物品

维修的权力

配件 & 工具

跳到步骤#11

Frances Belcher编辑

编辑已通过 由 Frances Belcher

已删除
已添加
不变

步骤行

[* violet] Remove the 6 bumper sensors from the side of your device
[* icon_note] This will require some muscle as the sensors are securely situated in the device currently. We recommend using a spudger if they are particularly difficult.
[* icon_reminder] You might need to cut the tap that is currently holding several sets of bumper sensor wires together. It might be helpful to tape the new sensor wires back together when putting your device back together.
[* violet] As you can see in the third photo the cable from the bumper sensor was originally connected to the motherboard.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加