跳转到主内容

修复你的物品

维修的权力

商店

跳到步骤#9

Kristen Gismondi编辑

编辑已通过 由 Kristen Gismondi

之前
之后
不变

步骤行

[* icon_caution] This next step will require some force as the cables are securely connected to the motherboard at this time.
[* violetred] Remove the two cables that connect the bumper and sensors from the motherboard.
[* violetred] Remove the two cables that connect the bumper and sensors from the motherboard.
[* icon_reminder] As you can see in the photo, the cable and the location of where it goes on the motherboard are marked with their respective shapes.
[* black] Fully disengage the bumper, along with the skinny IR sensor track from the main part of the device.
[* icon_note] The sensor track is hidden underneath the bumper, but it connected with several wires.

图片1

旧版本

新版本