跳到步骤#9

Arthur Shi编辑

编辑已通过 由 Arthur Shi

已删除
已添加
不变

步骤行

[* icon_caution] To reduce the risk of fire and chemical leakage, do not reuse and reinstall a used battery.
[* icon_reminder] To install a battery, apply new adhesive strips and ensure that the battery connector is properly aligned.
[* black] Tear two adhesive strips from the adhesive card, and apply them to the frame. Do not remove the top liner yet.
[* black] Place the new battery in the recess.
[* black] Use the flat end of a spudger or your finger to connect''temporarily ''connect the battery connector to the motherboard.
[* black] Use the flat end of a spudger or your finger to connect''temporarily ''connect the battery connector to the motherboard.