跳转到主内容

跳到步骤#17

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

-[* black] Use a spudger to pry the two serial ATA connectors straight away from the hard drive.
+[* black] Insert the flat end of a spudger into the gap between the SATA data connector and the hard drive.
+[* black] Twist the spudger to separate the SATA data connector from the hard drive, then disconnect it from the hard drive.
+[* icon_note] Repeat this process for the SATA power connector.