跳转到主内容

跳到步骤#10

Lauren编辑

编辑已通过 由 Jeff Suovanen

已删除
已添加
不变

步骤行

[title] Testing and further adjustments
[* black] Now to test. Re-assemble yourTo test the lens calibration reassemble the console but don't put any screws back but those needed forup to the ground springs near the memory card slots.
[* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console! I do not know why, but I read that it was importantconsole.
[* black] Now to test. Re-assemble yourTo test the lens calibration reassemble the console but don't put any screws back but those needed forup to the ground springs near the memory card slots.
[* icon_caution] The memory card ground springs MUST be put back on prior to restarting your console! I do not know why, but I read that it was importantconsole.
[* black] If any further adjustments are necessary just turn the potensiometer no more than 1 or 2 degrees more per readjustment. Eventually you'll start to see less DRE messages.
[* icon_note] Once you getthere no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.
[* icon_note] Once you getthere no more DRE messages, turn the potensiometer a further 1 degrees to "future-proof" your lens from DRE messages in the future.
[* icon_note] As stated in the title of this guide. This procedure may not fix your DRE problems if the faut lies elsewhere in the system. But this will cover about 98% of DRE messages.