跳转到主内容

跳到步骤#9

Christopher Cox编辑

等待批准

已删除
已添加
不变

步骤行

[title] The petensiometer
[* icon_note] The petensiometer is located as shown in the picture. It's a very small cross-wing screw mounted on top of a little black box.
[* blackicon_note] Now we need to adjust the potensiometer to make the optical lens laser stronger.
[* black] Using a very small flat head precision screwdriver turn the potensiometer no more than 3 degrees counter-clockwise.
[* icon_caution] Turning the potensiometer too much can result in the laser becomming too strong and actually burn the discs!
[* icon_note] Turning the potensiometer clockwise would just result in a weaker laser and create even more DRE messages.
[* blackicon_note] Now we need to adjust the potensiometer to make the optical lens laser stronger.
[* black] Using a very small flat head precision screwdriver turn the potensiometer no more than 3 degrees counter-clockwise.
[* icon_caution] Turning the potensiometer too much can result in the laser becomming too strong and actually burn the discs!
[* icon_note] Turning the potensiometer clockwise would just result in a weaker laser and create even more DRE messages.