跳转到主内容

跳到步骤#4

Christopher Cox编辑

等待批准

已删除
已添加
不变

步骤行

[title] Removing the fan
[* black] Locate the two (2) Phillips #2 screws, remove them and put them somewhere safe.
[* icon_note] It is not necessary to detach the fan wire from the power switch board.
[* black] Lift the fan housing slightly and slide it outwards and away from the rest of the unit. Just putlay it on its side next to rest to the side of the unit.
[* black] Lift the fan housing slightly and slide it outwards and away from the rest of the unit. Just putlay it on its side next to rest to the side of the unit.