iPad 3 4G Headphone Jack Assembly Replacement 步骤 #7 历史记录

跳到步骤＃7

由 Walter Galan — 2012年4月17日编辑

	[* black] Remove the following screws from the headphone jack assembly:
-	[* red] 5x 2.6 mm Phillips #0
-	[* orange] 2x 2.2 mm Wide Head Phillips #00
-	[* yellow] 2x 2.6 mm Phillips #00
-	[* icon_~~caution~~] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid striping the screw.
+	[* red] Five 2.6 mm Phillips #0
+	[* orange] Two 2.2 mm Wide Head Phillips #00
+	[* yellow] Two 2.6 mm Phillips #00
+	[* icon_note] These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid striping the screw.