跳转到主内容

跳到步骤#3

Vasily Zhabin编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.9 mm Phillips screw.
[* orange] Two 1.9 mm Phillips screws.
[* yellow] One 1.92.5 mm Phillips screw.
[* yellow] One 1.92.5 mm Phillips screw.
[* icon_note] If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.0 mm Phillips screw
[* orange] Five 1.9 mm Philips screws.
[* yellow] One 2.5 mm Phillips screw.