跳转到主内容

跳到步骤#3

Ben Eisenman编辑

等待批准

之前
之后
不变

步骤行

[* black] Remove the following screws securing the heat sink to the logic board:
[* red] One 5.9 mm Phillips screw.
[* orange] Two 1.9 mm Phillips screws.
[* yellow] Remove the 1.9 mm Phillips screw securing the processor clamp to the heat sink.
[* icon_note] If you have the A1304 version of MacBook Air, your heatsink will look different and will be a separate piece from the fan. There are 3 more screws to remove before the heatsink will be free:
[* black] One on the top middle of the heat sink
[* black] One on the top left near the fan
[* black] One on the bottom left near the fan