跳转到主内容

跳到步骤#3

Ben Eisenman编辑

等待批准

已删除
已添加
不变

步骤行

[* black]icon_note] If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:
[* black]icon_note] If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.9 mm Phillips screw.
[* orange] Two 1.9 mm Phillips screws.
[* [* yellow] Remove theOne 1.9 mm Phillips screw securingscrew.
[* icon_note] If you have
the processor clampA1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sinksink to the logic board:
[* red] One 5.0 mm Phillips screw
[* orange] Five 1.9 mm Philips screws.
[* yellow] One 2.5 mm Phillips screw
.
[* [* yellow] Remove theOne 1.9 mm Phillips screw securingscrew.
[* icon_note] If you have
the processor clampA1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sinksink to the logic board:
[* red] One 5.0 mm Phillips screw
[* orange] Five 1.9 mm Philips screws.
[* yellow] One 2.5 mm Phillips screw
.

图片1

旧版本

新版本

图片2

没有之前的图片

已添加