跳转到主内容

跳到步骤#3

Alvaro Hermida编辑

等待批准

之前
之后
不变

步骤行

[* icon_note] If you have the original version of the MacBook Air (A1237), refer to picture 1. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.9 mm Phillips screw. (found to be 5.0 mm on at least one A1237)
[* red] One 5.9 mm Phillips screw. (found to be 5.0 mm on at least one A1237)
[* orange] Two 1.9 mm Phillips screws.
[* yellow] One 1.9 mm Phillips screw. (found to be 2.4 mm on at least one A1237)
[* yellow] One 1.9 mm Phillips screw. (found to be 2.4 mm on at least one A1237)
[* icon_note] If you have the A1304 version of MacBook Air, refer to picture 2. Remove the following screws securing the heat sink to the logic board:
[* red] One 5.0 mm Phillips screw
[* orange] Five 1.9 mm Philips screws.
[* yellow] One 2.5 mm Phillips screw.