跳转到主内容

跳到步骤#1

Oliver编辑

编辑被拒绝 由 David Hodson

已删除
已添加
不变

步骤行

[* icon_note] If necessary, peel the EMI gasket off the camera cable connector.
[* black] Disconnect the camera cable by pulling the male end straight away from its socket toward the optical drive opening.
[* icon_caution] Do not try to lift this connector straight up off the board. Pull the connector parallel to the face of the logic board.
[* black] The connector may be fixed by a little black plastic block on the board. This block is only glued, you need to remove it, otherwise the connector must be lifted and gets easily damaged.
[* black] Deroute the camera data cable from the channel in the optical drive.