跳转到主内容

跳到步骤#1

Walter Galan编辑

等待批准

已删除
已添加
不变

步骤行

[* black] RemoveUsing the following four screws securingflat end of a spudger, pry the subwoofer and right speaker toconnector straight up off the upper case:logic board.
[* black] RemoveUsing the following four screws securingflat end of a spudger, pry the subwoofer and right speaker toconnector straight up off the upper case:logic board.
[* red] Two 3.2 mm Phillips screws.
[* orange] One 2.6 mm Phillips screw.
[* yellow] One 5 mm Phillips screw.
[* black] Lift the subwoofer and right speaker assembly out of the upper case.