跳转到主内容

跳到步骤#6

Sam Goldheart编辑

编辑已通过 由 Sam Goldheart

之前
之后
不变

步骤行

[* icon_note] If necessary, peel off the foam bumper covering the subwoofer connector.
-[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off the logic board.
-[* icon_caution] Be very careful. This connector is delicate, and can be easily broken off the logic board.
+[* black] Using the flat end of a spudger, pry the subwoofer connector straight up off its socket on the logic board.
+[* icon_caution] Be very careful. This connection is delicate, the socket can be easily broken off the logic board.

图片1

旧版本

新版本