跳到步骤＃1
由 Vanessa Ng — 编辑
编辑已通过 由 Vanessa Ng
- 之前
- 之后
- 不变
步骤行
| [* red] Remove two (2) 9mm x 4mm screws from the back panel with the size 0 Phillips head screwdriver. |
| [* orange] Remove two (2) 7mm x 4mm screws from the back panel with the size 0 Phillips head screwdriver. |
| [* yellow] Remove six (6) 7mm x 4mm screws with the size 0 Phillips head screwdriver. |
| [* green] Remove three (3) 3mm x |
| [* green] Remove three (3) 3mm x |
| [* light_blue] Remove one (1) 4mm x 4mm screws with the size 0 Phillips head screwdriver. |