跳转到主内容

跳到步骤#4

Connor编辑

等待批准

已删除
已添加
不变

步骤行

[* bluered] Locate the ribbon connector on the logic board.
[* blueblack] With the spudger, gently apply pressure to both sides of the brown connector lock until it pushes out.
[* blueblack] With the spudger, gently work the ribbon cable out of the connector until it is free.
[* bluered] Locate the ribbon connector on the logic board.
[* blueblack] With the spudger, gently apply pressure to both sides of the brown connector lock until it pushes out.
[* blueblack] With the spudger, gently work the ribbon cable out of the connector until it is free.

图片1

旧版本

新版本