跳转到主内容

跳到步骤#2

Connor编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_caution] With the spudger, gently pry the back plate off the unit starting at the corners.
[* icon_noteyellow] As you open the unit, locate the 8-pin white connector on the logic board and disconnect. The antenna side of the device should act like a hinge as you open it.
[* icon_cautionred] Open the device all the way, making sure to not disconnect the brown antenna wire.
[* icon_noteyellow] As you open the unit, locate the 8-pin white connector on the logic board and disconnect. The antenna side of the device should act like a hinge as you open it.
[* icon_cautionred] Open the device all the way, making sure to not disconnect the brown antenna wire.

图片2

旧版本

新版本

图片3

旧版本

新版本