跳转到主内容

跳到步骤#5

Andrew Bookholt编辑

等待批准

之前
之后
不变

步骤行

+[* black] Place the logic board flat on a table with the gold ground contacts facing up.
[* black] Using a pair of tweezers, insert the stripped ends of the battery leads into their respective holes.
- [* black] Insert the black lead into the rightmost hole.
+ [* black] Insert the black lead into the hole nearest the hold switch.
[* black] Insert the red lead into the center hole.
- [* black] Insert the white lead into the leftmost hole.
-[* icon_note] To keep the leads in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holes.
+ [* black] Insert the white lead into the hole furthest from the hold switch.
+[* icon_note] The location of the hold switch is shown in red.
[* icon_note] To keep the leads in place, it may be helpful to first bend the battery leads into their final shape, then insert the stripped ends into the holes.

图片1

旧版本

新版本