跳转到主内容

跳到步骤#5

Michal编辑

等待批准

之前
之后
不变

步骤行

[* black] Step 5 is about removing the cover which protects the processor from any outside damage
[* black] The cover is attached to four pins. In order to remove the cover, it has to be pulled towards the left.
-[* black] CAUTION: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
+[* black] ++CAUTION++: There may be a plastic (rubber) pin (see Image 2), which was put in place for guarantee purposes, therefore before sliding the panel, you should locate and remove this pin
[* black] It can also be pushed from the inside (by lifting the bottom of the cover first) (see image 3)