跳到步骤＃5
由 Dylan Treschl — 编辑
编辑已通过 由 Dylan Treschl
- 之前
- 之后
- 不变
步骤行
| + | [title] Remove the Nut Holding on the Read/Write Head |
|---|---|
| [* black] Next, remove the two clear protective plastic stickers from the newly-exposed bottom of the drive. | |
| [* black] Remove the nut that was previously enclosed under one of the stickers mentioned above (I used pliers to remove it, as I was too lazy to grab another socket). It is a bit hard to turn, as it is glued on, but apply enough force and it will come off. |