跳转到主内容

跳到步骤#2

Bill Murray编辑

编辑已通过 由 Bill Murray

之前
之后
不变

步骤行

-[* red] Now that the keyboard is outside of the laptop, you will see a ribbon cable coming from the back of the keyboard connected to the laptop
-[* orange] To detach this cable you must use the pointed edge of the spudger to press down on the locking mechanism
-[* icon_caution] Do not use too much pressure when disconnecting the ZIF connector
-[* icon_note] Use the spudger to disconnect the ZIF connector. In order to do this push the two ends of the black plastic towards the cable.
-[* yellow] After unlocking both sides of the ZIF connector you can remove the keyboard.
+[* icon_note] Now that the keyboard is outside of the laptop, you will see a ribbon cable coming from the back of the keyboard connected to the laptop.
+[* red] To detach this cable you must use the pointed edge of the spudger to press down on the locking mechanisms on each side.
+ [* icon_caution] Do not use too much pressure when disconnecting the ZIF connector.
+[* black] After unlocking both sides of the ZIF connector you can remove the keyboard.