跳转到主内容

跳到步骤#2

Bill Murray编辑

编辑已通过 由 Bill Murray

之前
之后
不变

步骤行

-[* black] Insert wisdom here.
+[* black] Now that the keyboard is out of the laptop, you will see a ribbon cable from the back of the keyboard connected to the laptop
+[* black] To detach this cable you must use the pointed edge of the spudger to press down on the locking mechanism
+[* icon_caution] Very little pressure is needed to press the locking mechanisms down. Pressing too hard could result in snapping the mechanisms
+[* icon_note] There are two locking mechanisms, one to the right of the cable connector and one to the left
+[* black] After unlocking both sides of the mechanisms you can slowly pull the ribbon cable out

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加