跳转到主内容

跳到步骤#4

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] GraspUse the endtip of a spudger to slide the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand. Slide the logic boardclick wheel ribbon cable out of its holding brackets on the rear of the displaysocket.
[* icon_note] The logic board is still connected to the iPod by twothe display ribbon cablescable.
[* black] GraspUse the endtip of a spudger to slide the logic board near the battery connector with one hand, and hold onto the rest of the iPod with your other hand. Slide the logic boardclick wheel ribbon cable out of its holding brackets on the rear of the displaysocket.
[* icon_note] The logic board is still connected to the iPod by twothe display ribbon cablescable.

图片1

旧版本

新版本

图片2

已删除