跳转到主内容

跳到步骤#6

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] It may be necessary to soften the thermal paste between the logic board and heat sink. You can soften the thermal compound using a hairdryer. Move the hairdryer back and forth over the ribbed metal section of the heat sink for one minute. At this point, the heat sink should come free easily.
[* black] UseIf necessary, use a spudger to pry up the heat sink up onfrom the left side,side near the hard drive.
[* black] While lifting straight up on the hinge grill with your right hand, lift the heat sink with your left hand from the end nearest the hard drive and remove the heat sink assembly from the computer.
[* black] UseIf necessary, use a spudger to pry up the heat sink up onfrom the left side,side near the hard drive.
[* black] While lifting straight up on the hinge grill with your right hand, lift the heat sink with your left hand from the end nearest the hard drive and remove the heat sink assembly from the computer.

图片1

没有之前的图片

已添加