跳转到主内容

跳到步骤#5

Andrew Bookholt编辑

等待批准

已删除
已添加
不变

步骤行

[* black] Remove the following 69 screws and 32 nuts from the heat sink:
[* red] Four 3 mm Phillips from around the fan and the heat sink bracket. The bracket can also be removed at this point.
[* black] Remove the following 69 screws and 32 nuts from the heat sink:
[* red] Four 3 mm Phillips from around the fan and the heat sink bracket. The bracket can also be removed at this point.
[* orange] One 11.5 mm (left) and one 4.5 mm (right) Phillips from the plastic fingers of the hinge grill.
[* yellow] One 4.5 mm Phillips at the top right corner of the heat sink.
[* green] Two 6 mm Phillips on the lower left corner and face of the heat sink.
[* violet] Two 4 mm screw nuts with attached springs from either side of the heat sink.
[* blue] One 4 mm nut from the right side of the heat sink.
[* violet] Two 4 mm screw nuts with attached springs from either side of the heat sink.

图片1

旧版本

新版本