菜单

你的设置

跳到步骤＃1

由 Ricardo Espinosa — 编辑

编辑已通过 由 Ricardo Espinosa

已删除
已添加
不变

步骤行

[* black] First remove the flex connector cables. There are two highlightedbegin by removing the red squaresthree cross-head screws using "..."
[* black] Do not apply too much pressureKeep the screws and make sure thatseperate them form the black plastic tabs are fully open before you pull the cable outrest as there are multipole sizes in this tablet.
[* black] First remove the flex connector cables. There are two highlightedbegin by removing the red squaresthree cross-head screws using "..."
[* black] Do not apply too much pressureKeep the screws and make sure thatseperate them form the black plastic tabs are fully open before you pull the cable outrest as there are multipole sizes in this tablet.

图片1

旧版本

新版本