跳转到主内容

跳到这一步

Claudia Torres编辑

编辑已通过 由 Claudia Torres

之前
之后
不变

步骤行

[* black] Use the spudger to gently pry up a portion of the keyboard where the clip has been pushed in.
-[* black] When a portion of the keyboard has been slightly lifted guide the spudger along the top and left/right sides in order to release it from all of the clips.
-[* icon_caution] Do NOT completely lift the keyboard up. There is still a cable connected to the back which will get damaged.
-[* yellow] Slowly lift the keyboard up at an angle.

图片2

已删除