跳转到主内容

跳到步骤#7

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

-[* red] In this position the last cable to the motherboard can be disconnected using the spudger to push each end out until loose enough to pull the cable completely out.
-[* orange] The motherboard can now be completely removed from the laptop enclosure.
+[* red] Rotate the motherboard to the right and lay it down so that the copper heatsink is facing up and parallel with the bottom of the monitor.
+[* orange] In this position the last cable to the motherboard can be disconnected using the spudger to push each end out until loose enough to pull the cable completely out.
+[* yellow] The motherboard can now be completely removed from the laptop enclosure.

图片1

旧版本

新版本

图片2

旧版本

新版本