跳转到主内容

跳到步骤#6

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

[* red] Remove the 3 Phillips #0 screws from the fan bracket.
[* orange] Lift the fan up by hand before attempting to remove the motherboard and place back down slightly out of position.
+[* icon_caution] Do not fully remove the motherboard. As there is hidden cable on the underside that could be damaged.
[* yellow] The motherboard can be lifted towards the monitor and rotated so that the copper heat sink is facing up and parallel with the bottom on the monitor.