跳转到主内容

跳到步骤#4

Claudia Torres编辑

编辑已通过 由 Claudia Torres

之前
之后
不变

步骤行

-[* red] Remove the two remaining ribbon cables as described in Step 7.
+[* red] Remove the two remaining ribbon cables as described in Step 11.
[* orange] Remove the display cable with the spudger by pushing each end of the cable out of the connector until it is loose enough to be pulled out by hand.
[* yellow] In a similar fashion as with the display cable use the spudger to remove the two power cables from the motherboard.