跳转到主内容

跳到步骤#4

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

[* red] Remove the two remaining ribbon cables as described in Step 6 .
-[* orange] Remove the display cable with the spudger by pushing each end out of the connector until it is loose enough to be pulled out by hand.
-[* yellow] In a similar fashion as with the display cable use the spudger to help remove the two power cables.
+[* orange] Remove the display cable with the spudger by pushing each end of the cable out of the connector until it is loose enough to be pulled out by hand.
+[* yellow] In a similar fashion as with the display cable use the spudger to remove the two power cables from the motherboard.