跳转到主内容

跳到步骤#4

Claudia Torres编辑

编辑已通过 由 Claudia Torres

之前
之后
不变

步骤行

-[* red] Remove the two remaining ribbon cables as described in step 6 .
-[* orange] Remove the display cable with the spudger by pushing each end out of the connector until it is loose enough to be pulled out by hand
+[* red] Remove the two remaining ribbon cables as described in Step 6 .
+[* orange] Remove the display cable with the spudger by pushing each end out of the connector until it is loose enough to be pulled out by hand.
[* green] In a similar fashion as with the display cable use the spudger to help remove the two power cables.