跳转到主内容

跳到步骤#4

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

[* red] Remove the two remaining ribbon cables as described in step 6 .
-[* orange] Remove the display cable with the spudger by pushing each end out of the connector multiple times each until it is loose enough to be pulled out by hand
-[* black] Remove the two power cables using the spudger.
+[* orange] Remove the display cable with the spudger by pushing each end out of the connector until it is loose enough to be pulled out by hand
+[* green] In a similar fashion as with the display cable use the spudger to help remove the two power cables.

图片2

旧版本

新版本

图片3

没有之前的图片

已添加