跳转到主内容

跳到步骤#2

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

+[* yellow] Remove the 8 Phillips #0 screws from under the keyboard.
[* red] Remove the two ribbon cables using a spudger too push each end of the retention mechanism toward the ribbon cable being removed. (This is the same mechanism as the keyboard's ribbon cable)
[* red] Once the mechanism is released you may remove the cable by hand.
[* black] The plastic cover can now be easily lifted and removed from the rest of the laptop.

图片1

旧版本

新版本

图片2

旧版本

新版本

图片3

没有之前的图片

已添加