跳转到主内容

跳到这一步

Claudia Torres编辑

编辑已通过 由 Claudia Torres

之前
之后
不变

步骤行

[* black] Flip the keyboard towards yourself and lay it down above the track pad area.
[* red] Use a spudger to push the retention mechanism toward yourself from each end to release the ribbon cable.
+[* icon_caution] Do not press to hard because it can lead to snapping the mechanism.
+[* icon_note] There are two locking mechanisms on both sides of the cable connector.
[* black] The ribbon cable can now be removed by hand from the retention mechanism. And the entire keyboard can also be removed.