跳转到主内容

跳到这一步

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

-[* black] Use a spudger to gently pry the two antenna wires from the Wifi card.
-[* black] Remove the single Philips #00 screw from the wifi card.
-[* black] Lift the card up and pull out by the sides of the PCB (Printed Circut Board).
+[* red] Use a spudger to gently pry the two antenna wires up and off of the wireless card.
+[* blue] Remove the single Philips #00 screw from the wireless card. Once removed the card will spring up at an angle.
+[* yellow] Pull the card out by holding the two ends.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加