跳转到主内容

跳到这一步

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

-[* black] Do not fully remove the motherboard. As there is hidden cable on the underside that could be damaged.
-[* black] Gently lift the motherboard upwards and then to the right to free the I/O ports from the enclosure.
-[* black] The motherboard can be lifted towards the monitor and rotated so that the copper heat sink is facing up and parallel with the bottom on the monitor.
-[* black] In this position the last cable to the motherboard can be disconnected using the spudger to push each end out until loose enough to pull the cable completely out.
+[* icon_caution] Do not fully remove the motherboard. As there is hidden cable on the underside that could be damaged.
+[* red] Gently lift the motherboard upwards and then to the right to free the I/O ports from the enclosure.
+[* yellow] The motherboard can be lifted towards the monitor and rotated so that the copper heat sink is facing up and parallel with the bottom on the monitor.
+[* blue] In this position the last cable to the motherboard can be disconnected using the spudger to push each end out until loose enough to pull the cable completely out.
[* black] The motherboard can now be completely removed from the laptop enclosure.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加