跳转到主内容

跳到这一步

Daniel Trudeau编辑

编辑已通过 由 Daniel Trudeau

之前
之后
不变

步骤行

-[* black] Remove the 8 Phillips #0 screws from under the keyboard.
-[* black] Remove the two ribbon cables by using a spudger too push each end of the retention mechanism toward the ribbon cable being removed as in step 6.
-[* black] Once the mechanism is released you may remove the cable by hand.
+[* yellow] Remove the 8 Phillips #0 screws from under the keyboard.
+[* red] Remove the two ribbon cables by using a spudger too push each end of the retention mechanism toward the ribbon cable being removed as in step 6.
+[* red] Once the mechanism is released you may remove the cable by hand.
[* black] The plastic cover can now be easily lifted and removed from the rest of the laptop.

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加

图片3

没有之前的图片

已添加