Skip to main content

Changes to this Step

Edit by Miroslav Djuric

等待批准

Deleted
Added
Unchanged

Step Lines

[* icon_caution] The connectors at the ends of the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
[* black] Lift the upper case enough to disconnect the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefully pry the connector from its socket.
[* black] Carefully disconnect the multicolored speaker cable from the logic boardboard in the same fashion.
[* black] Carefully disconnect the multicolored speaker cable from the logic boardboard in the same fashion.