跳到步骤＃2
由 Tyler Starr — 编辑
编辑已通过 由 Tyler Starr
- 之前
- 之后
- 不变
步骤行
| [* black] Pull the SD card reader from the edge with two holes gently to free the tab at the top of the SD card reader. | |
| [* icon_caution] Don't completely pull the SD card out of the device yet. There is a ribbon cable connected under the SD card reader. | |
| - | [* black] Reorient the device so that the power jack faces you and lift the SD card reader gently. |
| - | [* black] Use a plastic opening tool to pry the SD card ribbon cable off the socket on the motherboard. |
| + | [* black] Reorient the device so that the power jack faces you. |
| [* black] Lift the SD card reader out off of the lower casing. |