跳转到主内容

跳到步骤#2

Ahmed Gouda编辑

编辑已通过 由 Ahmed Gouda

之前
之后
不变

步骤行

+[* black] Pull the slot on the top of the SD card reader from the 3DS to loosen the top edge of it
+[* icon_caution] There is a ribbon cable on the bottom of the SD card reader connected to the motherboard. Don't completely pull out the SD card reader at this point
+[* black] Use the flat end of a spudger to pry the SD card ribbon cable off the socket on the motherboard.
+[* black] Lift the SD card out off of the lower casing.