跳到步骤＃2
由 Ahmed Gouda — 编辑
编辑已通过 由 Ahmed Gouda
- 之前
- 之后
- 不变
步骤行
| + | [* black] Lift the top edge of the lower case slightly off on the 3DS |
|---|---|
| + | [* icon_caution] There are two ribbon cables across the top of the device and one in the bottom that should still be connected so don't pull the lower casing completely off. |
| + | [* black] Use the plastic opening tool to pry the ribbons across the top off the sockets on the motherboard. |
| + | [* black] Lift the top edge of the lower case off the rest of the 3DS |
| + | [* black] Use the plastic opening tool to remove the last ribbon cable off the socket on the bottom of the motherboard of the device |