跳转到主内容

跳到步骤#1

Keaton Frahmann编辑

编辑已通过 由 Keaton Frahmann

之前
之后
不变

步骤行

+[* black] Turn the device upside down to reveal the rubber section of the back plate. Using a metal spider carefully wedge the blunt tip into the space between the aluminum back plate and the rubber and separate the two pieces
+ [* icon_note] This may take a few unites to to pry the rubber completely off and once your are able to get a good grip on the rubber it is easier to start peeling off with your hands
+ [* icon_note] Don't worry about putting the rubber back on; the adhesive has plenty of strength to refix itself to aluminum when you are done

图片1

没有之前的图片

已添加

图片2

没有之前的图片

已添加