跳转到主内容

跳到这一步

Keaton Frahmann编辑

编辑已通过 由 Keaton Frahmann

之前
之后
不变

步骤行

[* black] Turn the device upside down to reveal the rubber section of the back plate. Using a metal spudger carefully wedge the blunt tip into the space between the aluminum back plate and the rubber and separate the two pieces.
[* icon_note] This may take a few minutes to pry the rubber completely off and once you are able to get a good grip on the rubber it is easier to start peeling it off with your hands instead.
- [* icon_note] Don't worry about putting the rubber back on, the adhesive has plenty of strength to refix itself to the aluminum when you are done.
+ [* icon_note] Don't worry about putting the rubber back on; the adhesive has plenty of strength to refix itself to the aluminum when you are done.