跳转到主内容

跳到步骤#3

Sophia Flumerfelt编辑

编辑已通过 由 Sophia Flumerfelt

之前
之后
不变

步骤行

-[* black] To remove the screws, use the 2.0 mm Flathead screwdriver provided in the Pro Tech Toolkit set. Once removed, be sure to put the screws in a safe place. There should be four screws all together.
+[* black] Use a 2.0 mm Flathead screwdriver to remove the screws. Hold the screwdriver parallel to the surface while turning the screwdriver counterclockwise.
+[* black] Once removed, be sure to put the screws in a safe place. There should be four screws all together.