跳转到主内容

跳到步骤#3

Connor Alvin编辑

编辑已通过 由 Connor Alvin

之前
之后
不变

步骤行

-[* black] Use a 2.0 mm Flathead screwdriver to remove the screws. Hold the screwdriver parallel to the surface while turning the screwdriver counterclockwise.
+[* red] Use a J000 screwdriver to remove the screws. Hold the screwdriver parallel to the surface while turning the screwdriver counterclockwise.
[* black] Once removed, be sure to put the screws in a safe place. There should be four screws all together.

图片1

旧版本

新版本