跳转到主内容

跳到步骤#3

davidroady编辑

编辑被拒绝 由 Jake Devincenzi

已删除
已添加
不变

步骤行

[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* black] Disconnect the eight indicated connectors by placing a spudger beneath each one on the cable side and lifting up. Be sure to pry up from the side with the wires, just under where they connect! Any other point will break the connector off the board.
[* icon_caution] Use care when disconnecting some of the smaller connectors. A forceful prod with the spudger may accidentally break them off the logic board.