跳到步骤＃10
由 Pierre-Alain Parfond — 编辑
编辑已通过 由 Carsten Frauenheim
- 之前
- 之后
- 不变
步骤行
| - | [* black] Apply flux to the positive contact of the |
|---|---|
| + | [* black] Apply flux to the positive contact of the battery on the PCB (Incidental finding is a SMD fuse F1 on this PCB) |
| [* black] Using desoldering braid unsolder the positive contact from the PCB. | |
| [* black] Apply some gentle pressure with a small tool to remove the battery. | |
| [* icon_caution] The battery should remove easily. If it does not, double check the battery contacts on the PCB to ensure they are not still connected somewhere. Another going over with the soldering iron may be required to complete that task. |