跳转到主内容

跳到步骤#6

Taylor Atterbury编辑

等待批准

已删除
已添加
不变

步骤行

[* icon_note] Turn the monitor on its side so that the power supply and circuit board are facing to the right
[* red] Remove the two 6.6mm6.6 mm Phillips #2 screws located on the right and left sideboth sides of the metal casing. Use a Phillips #2 screwdriver to remove all fourcasing (four screws total).
[* red] Remove the two 6.6mm6.6 mm Phillips #2 screws located on the right and left sideboth sides of the metal casing. Use a Phillips #2 screwdriver to remove all fourcasing (four screws total).